WebFor insert mold bonding, apply Chemlok 487 adhesive to prepared metal or plastic inserts at a dry film thickness of 17.8-25.4 micron (0.7-1.0 mil). For harsh environments, prime metal inserts with Chemlok 205 primer before applying Chemlok 487 adhesive as a topcoat. For injection molding TPEs to glass, clean the glass surface WebLord Adhesives Chemlok® 144 Primer Lord Adhesives Chemlok® 205 Primer and/or Adhesive Lord Adhesives Chemlok® 205LH Primer Lord Adhesives Chemlok® 206 Blue Primer and/or Adhesive Lord Adhesives Chemlok® 207 Primer Lord Adhesives Chemlok® 207LH Primer Lord Adhesives Chemlok® 2100/2101 Low VOC Tank-Lining Adhesive, …
Chemlok® 205 Primer and/or Adhesive LORD Corp EMEA
WebChemlok 205 primer is normally used full strength for brush, dip and roll coat applications. For spray applica-tion, dilute primer to a Zahn Cup #2 viscosity of 18-20 seconds. … WebApply Chemlok 205 adhesive to stainless steel, aluminum, brass or other nonferrous substrates within one-half hour after cleaning. For ferrous substrates such as steel, a longer layover can be tolerated if no rust is formed. Chemlok 205 adhesive is normally used full strength for brush, dip and roll coat applications. filem the man in the white suit
Chemlok 205 Primer - rrchem.in
WebCHEMLOK 205 Page 1 of 9 1.1 PRODUCT NAME: CHEMLOK 205 1.2 COMPANY LORD CHEMICAL PRODUCTS (AUSTRALIA) PTY. LTD. ACN 085 209 712 21 Beverage Drive Tullamarine Victoria 3043 Australia Phone: 03 - 9335 6620 Fax: 03 - 9335 6570 1.3 EMERGENCY Telephone: 1800 033 111 - ANYTIME AUSTRALIA WIDE 1.4 … WebAllow primer to thoroughly dry before applying Chemlok 6125GB. For further detailed information on surface preparation of specific substrates, refer to Chemlok application guide. Mixing – Thoroughly stir Chemlok 6125GB before use, and agitate sufficiently during use to keep dispersed solids uniformly suspended. Agitation methods and times will WebChemlok® 459X primer is designed for promoting adhesion to TPE, TPO, EPDM and other difficult-to-coat elastomers . It can be used with urethane and epoxy adhesives, as well as with a variety of double-sided tapes. Technical Specifications Color: Amber Liquid Dynamic Viscosity: ~10 cps @ 25°C (77°F) Density: grogan case law